008617372676486
Facebook Youtobe Linkedin
You are here:
Commercial High Capacity Reverse Osmosis System / Water filtration equipment manufacturers /Water Purified Equipment
Commercial High Capacity Reverse Osmosis System / Water filtration equipment manufacturers /Water Purified Equipment
Commercial High Capacity Reverse Osmosis System / Water filtration equipment manufacturers /Water Purified Equipment
Share This Product

Commercial High Capacity Reverse Osmosis System / Water filtration equipment manufacturers /Water Purified Equipment

The desalination rate of reverse osmosis unit is high, and that of single membrane can reach 90%.
Reverse osmosis can effectively remove microorganisms such as bacteria, organic matter and inorganic matters such as iron, manganese and silicon.
Fully stainless Steel Frame and each part  contacted with water is food-grade stainless steel ,Southern pump gives high pressure for RO System. American membrane could be customized for you.

Product Description

Commercial High Capacity Water Purified Equipment Reverse Osmosis System / Water filtration equipment manufacturers 

Product Description:

All kinds of purified water production lines with pure water output of more than 0.25-160 tons / h. The RO membrane is made of hydantoin or Dow membrane components. The RO membrane shell is made of standard load stainless steel or high-quality FRP membrane shell. The raw water pressurization, RO pressurization, cleaning system, etc. shall be the South stainless steel pump or Danish Grundfos pump, etc. Electrical components shall be Chint or ABB equivalent.

Manual / automatic exchange control is adopted in water making process, and Siemens or ABB equivalent components are used for automatic control. According to the requirements of effluent, various production processes can be designed, such as primary reverse osmosis, secondary reverse osmosis, reverse osmosis plus compound bed (mixed bed),

Reverse osmosis and EDI. It can meet the production and domestic water standards of various industries with the resistance rate of 0.5-18m ω. Cm and the conductivity below 10us / cm.

The change of water quality caused by the fluctuation of source water quality is slowed down, which is conducive to the stability of water quality in production, which has a positive effect on the stability of purified water product quality.
the effluent water quality is greatly superior to other methods.Compared with the pure water made by sodium ion exchange, the cost of chemicals, labor and waste water treatment caused by resin regeneration is reduced, and the environmental pollution is also reduced.

Measures taken to ensure water quality not only relate to the treatment of the water, but to its conveyance and distribution after treatment. It is therefore common practice to keep residual disinfectants in the treated water to kill bacteriological contamination during distribution.

Water supplied to domestic properties, for tap water or other uses, may be further treated before use, often using an in-line treatment process. Such treatments can include water softening or ion exchange. Many proprietary systems also claim to remove residual disinfectants and heavy metal ions.

Water treatment for drinking water production involves the removal of contaminants from raw water to produce water that is pure enough for human consumption without any short term or long term risk of any adverse health effect. In general terms, the greatest microbial risks are associated with ingestion of water that is contaminated with human or animal (including bird) faeces. Faeces can be a source of pathogenic bacteria, viruses, protozoa and helminths.
The destruction of microbial pathogens is essential and very commonly involves the use of reactive chemical agents such suspended solidsbacteriaalgaevirusesfungi, and minerals such as iron and manganese. These substances continue to cause great harm to several lower developed countries who do not have access to water purification.

Related Products

×

    Contact Us Now!